PLATINUM TOOLS Net Prowler PRO Test Kit. Kit includes: Net Prowler main unit. Network/Tel ID remote set. Coax ID-only remote set. RJ45 ID only remote set. Micro USB, RJ45 to alligator.

The Cable Prowler™ combines network testing (physical layer and link), cable verification & troubleshooting and PoE voltage testing in a handheld tester with a full-color display; all with the capability of saving and printing tests results from a personal computer. 

Cable Verification & Troubleshooting:
The Cable Prowler provides full cable testing on any category network, coax, or telephone cable. It will display wire map, numbered ID remotes, and any faults, including shorts, opens, mis-wires, split pairs, and reverses, The full-featured Cable Prowler measures cable length (using TDR technology) and generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin.

PoE Voltage Testing:
The Cable Prowler enables quick identification of a network drops link capability and current link status. Cable Prowler also tests the presence of PoE on the network drop and what class of PoE per IEEE 802.3 af/at with load test for voltage drop. These network tests can also be saved for record keeping and printing.

Kit Includes:
Cable Prowler™ main unit
#1-8 Network/Tel-Test and ID Smart Remote set
#1-8 Push on Coax ID-only Remote set
#1-12 RJ45 Data ID-only Remote set
Micro USB cable
No-Fault cable - Qty 2
RJ45 Port Saver
RJ45 to Alligator 12 inch
F Female to F Female adapters, set of 2
BNC Female to F Female adapter
BNC Female to F Male adapter
Heavy duty case

Features

• Displays length measurement for each pair in feet or meters using TDR technology
• Full-color graphical wire-mapping
• Tests Ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, mis-wires, split pairs, and reverses
• Detects and reports current link speed and link capabilities for active Ethernet drop up to 1 Gbps
• Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop
• Ability to define cable name, save cable tests and print ALL results (cable testing & network testing)
• View saved cable tests
• Link light to identify location on a hub/switch/router port
• Supports up to 20 network & coax ID - only mapping remotes
• Supports up to 8 testing & ID SMART remotes for network & telephone cables
• Generates selectable tones on selected pins for use with tone tracers
• Multilingual (English, French, Spanish, German, and Italian)

Application

• Measure cable length and length to faults using TDR technology
• Network testing of link capability, link status, and link light
• Test PoE to ensure adequate power for powered devices such as VoIP phones
• Conduct single ended and remote cable tests with display of PASS, wire map, ID, and faults for network & coax cables
• Tone and trace cables
• Locate unlabeled network & coax cables with up to 20 remote identifiers
• Test multiple (up to 8) network & telephone drops with testing & identifier remotes
• Define a cable name for your cable test, save every cable test, export to your computer for record keeping and printing